No. The intent is to only count prenatal visits, which by definition can only occur prior to delivery. Do not count visits that occur on or after the date of delivery for the Timeliness of Prenatal Care indicator.
HEDIS 2020
FAQ Directory: HEDIS
Filter Results
2.14.2020 Prenatal and Postpartum Care For members whose last enrollment start date is less than 42 days prior to delivery, should we include prenatal visits that occur after the delivery date but within 42 days after the enrollment start date?
1.15.2020
Adherence to Antipsychotic Medications for Individuals With Schizophrenia Are the first two bullets below in Step 2: Exclusions of the Event/Diagnosis “required” exclusions?
• A diagnosis of dementia (Dementia Value Set).
• Did not have at least two antipsychotic medication dispensing events. There are two ways to identify dispensing events: by claim/encounter data and by pharmacy data. The organization must use both methods to identify dispensing events, but an event need only be identified by one method to be counted.
– Claim/encounter data. An antipsychotic medication (Long Acting Injections 14 Days Supply Value Set; Long Acting Injections 28 Days Supply Value Set; Long Acting Injections 30 Days Supply Value Set).
– Pharmacy data. Dispensed an antipsychotic medication on an ambulatory basis. Use all the medication lists in the Oral Antipsychotic Medications and Long-Acting Injections tables below to identify antipsychotic medication dispensing events.
Yes. The first two bullets in Step 2 of the Event/Diagnosis are required exclusions and supplemental data may be used when reporting them. These exclusions are reported in the “Number of required exclusions” data element in IDSS. The remainder of the bullets in Step 2 are exclusions, but they are not required exclusions and supplemental data may not be used when reporting them.
HEDIS 2020
12.16.2019 Childhood Immunization Status The third bullet in the Rotavirus numerator description references Rotavirus (2 Dose Schedule) Procedure Value Set, which does not exist in the Value Set Directory. Which value set should be used for reporting?
12.16.2019 Follow-Up Care for Children Prescribed ADHD Medication The third bullet in the Rate 2-C&M Phase numerator description references the Observation Visit Value Set, which does not exist in the Value Set Directory. Which value set should be used for reporting?
12.02.2019 Prenatal and Postpartum Care The PPC measure defines an enrollment segment as a period of continuous enrollment with no gaps. The “last enrollment segment” is used in calculating the timelines of prenatal care numerator and is defined as the enrollment segment during the pregnancy with a start date closest to the delivery date. How do organizations identify the last enrollment segment for a member who has multiple enrollment segments?
For HEDIS 2020 reporting, enrollment segments are determined based on enrollment data provided by the health plan. If a plan provides the member's enrollment in different products/product lines as different enrollment segments, or even enrollment in the same product/product lines as different enrollment segments, the start date of the last enrollment segment must be used.
HEDIS 2020
12.02.2019
General Guideline 33: Measures That Require Results From the Most Recent Test or Measurement With General Guideline 33, organizations must use the most recent date when multiple dates of service for the same lab test are provided within a 7-day period. Which test is used in the following example, the September test or the December test?
A HbA1c lab claim on 12/30/2019 had a result date in the medical record on 1/3/2020. The member also had an HbA1c test with both the test and a result on 9/30/19.
Using General Guideline 33, the 12/30/2019 test is used as the most recent test while the 1/3/2020 result is within 7 days of the test, it is after the date threshold in the measure and may not be used. The result is counted as missing and the member is compliant for the HbA1c Testing and HbA1c Poor Control indicators. The member is not compliant for the HbA1c Control <7 for Selected Populations and HbA1c Control <8 indicators.
The 9/30/2019 test cannot be used as it is not the most recent.
Note: Ensuring results in the year after the measurement year are not counted is not tested in HEDIS 2020 Measure Certification.
HEDIS 2020
12.02.2019 Potentially Harmful Drug-Disease Interactions in Older Adults In the DDE measure, the IESD definition states, “For an acute inpatient encounter identified only by a professional claim (where the discharge date cannot be determined), the IESD is the date of service.” However, the definition does not specify which date to use as the IESD for nonacute inpatient encounters. Which date should be used?
12.02.2019 General Guideline 37: Measures That Use Medication Lists General Guideline 37 states that if an organization uses both pharmacy data (NDC codes) and clinical data (RxNorm codes) for reporting, to avoid double counting, deduplicate and count an NDC code and an RxNorm code for the same drug on the same date of service as only one dispensing event. If a measure specification says, “if multiple prescriptions for the same medication are dispensed on the same day, sum the days supply,” should the days supply from the pharmacy data event and the clinical data event be summed?
The intent of GG 37 is to prevent double-counting when an organization uses both pharmacy data (NDC codes) and clinical data (RxNorm codes) for reporting, because the same dispensing event can have both an NDC code in the pharmacy data and an RxNorm code in the clinical data. Because the two codes identify the same dispensing event (not two dispensing events), count an NDC code and an RxNorm code on the same date of service as one dispensing event and do not sum the days supply.
HEDIS 2020
12.02.2019 The “Route” column in the Asthma Medication Ratio and Medication Management for People With Asthma measures In the Asthma Controller Medications table and the Asthma Reliever Medications table (in the AMR and MMA measure specifications), what is the “Route” column used for?
Use the “Route” information from the tables to apply the “Definitions” for calculating an “inhaler dispensing event” and an “injection or intravenous dispensing event.” For routes listed as “subcutaneous” or “intravenous,” use the “injection or intravenous dispensing event” definition.
Note: In the MLD, the “Route” column lists “subcutaneous” and “intravenous” as “injection.”
HEDIS 2020
12.02.2019 Use of High-Risk Medications in Older Adults Why is NDC code 50090096201 included on both the Digoxin .25 mg Medications List and the Digoxin .125 mg Medications List?
NDC codes can be used to identify different medications at different points in time. The NDC code 50090096201 identified digoxin .125 mg until July 2017 and was reassigned to digoxin .25 mg in 2019. The code is included in both lists because of the time frame NCQA used for removing obsolete NDC codes (the look-back period for the measure plus two additional years).
Because it is likely that the code on a claim during the calendar year indicates digoxin .25 mg and because this issue may impose confusion when programming the measure, organizations may elect to remove the NDC code from the Digoxin .125 mg Medications List for HEDIS 2020 reporting. Measure Certification will only test this code as part of the Digoxin .25 mg Medications List.
HEDIS 2020
12.02.2019 General Guideline 50: Mapping Proprietary or Other Codes Organizations may map NDC or RxNorm codes based on generic name (or brand name), strength/dose and route. What information is used to map “dose” or “route”?
For mapping purposes, the organization must demonstrate that the medication being mapped is the same as a medication listed in the Medication List Directory (MLD). For example, the route for “benralizumab” is listed as “subcutaneous” in the Asthma Controller Medications table (p. 153 HEDIS 2020 Volume 2).
The MLD contains two generic products for benralizumab: “1 ML benralizumab 30 MG/ML Prefilled Syringe” and “benralizumab 30 MG/ML Prefilled Syringe,” where the Route is listed as “injection.” Therefore, it would be appropriate to map a code with the generic name “benralizumab” and strength “30 MG/ML and dose form or route of either “syringe” or “prefilled syringe” or “injection.”
Another example is fluticasone, which is listed as “inhalation” in the Asthma Controller Medications table. The MLD (Generic Product Name) identifies appropriate dose/forms as “metered dose inhaler” or “dry powder inhaler,” and lists the route as “inhalation.” Therefore, it would be appropriate to map codes for fluticasone if the strength/dose matches one in the MLD and if the dose form or route is “inhaler” or “metered dose inhaler” or “powder inhaler” or “inhalation.” It would not be appropriate to map codes for fluticasone with dose form or route of “nasal spray.”
HEDIS 2020
