No. PHQ consists of the specified certification options: Physician Quality (PQ), Hospital Quality (HQ), or both. Contact phq@ncqa.org to discuss your situation so we can consider additional survey options to meet market needs.
FAQ Directory
Here are some of the most frequently asked questions about NCQA’s various programs. If you don’t see what you are looking for in one of the entries below, you can ask a question through My NCQA.
Filter Results
-
Save
Save your favorite pages and receive notifications whenever they’re updated.
You will be prompted to log in to your NCQA account.
Save your favorite pages and receive notifications whenever they’re updated.
You will be prompted to log in to your NCQA account.
-
Email
Share this page with a friend or colleague by Email.
We do not share your information with third parties.
Share this page with a friend or colleague by Email.
We do not share your information with third parties.
-
Print
Print this page.
Print this page.
11.15.2012 Certification for information providers May an information provider earn certification for the pieces it provides (e.g., standards, methodology, underlying data), while its customer (i.e., health plan that publishes the information) pursues other pieces (e.g., member communication and complaints, physician communication)?
11.15.2012 Following Standardized Measure Specifications Does a program have to use the most recent version of a measure to count it as a standardized measure in Element A?
11.15.2012 Use of patient experience data collected from external organizations Is the use of patient experience data considered part of the program in the following circumstances: 1. The organization incorporates third-party performance information data with its own and then takes action on it (i.e., integrates the third-party data with its own to develop a composite that it reports or uses as the basis of action, such as payment or network or benefit design) 2. The organization provides a link for members on a third-party site so the member can review that information?
For scenario 1, the data must be considered as part of the program being reviewed for PHQ because the organization has incorporated the data with its own or tailored the data and then used the data as a basis for its own action (e.g., reporting, payment or network or benefit design). For scenario 2, if _ as part of its program _ the organization simply provides a link to an external source of performance information on physicians without altering that data and represents it as such, and the organization does not take any action based on the data (e.g., pay any incentive or use data for network or benefit design) then it is not considered part of the program.
This applies to the following Programs and Years:
PHQ 201311.15.2012 Applicable factors for CM program If some factors are not applicable for our case management program, how would we address it to meet the requirements in CM 2, Element E: Initial Assessment?
For CM 2, Element E, which is a file review element, NCQA is looking for documentation of whether or not you completed the applicable activities listed in CM 2, Element D: Initial Assessment Process. For your program, you would note in your documentation that certain factors are not applicable for that particular patient population.
This applies to the following Programs and Years:
CM 201411.15.2012 Methodology for evaluation of cost measures What constitutes an acceptable methodological approach to evaluation of cost?
NCQA does not prescribe the cost measures an organization selects, though it requires an organization to specify all aspects of its methodology (Element C). In addition, the organization must risk-adjust its measures (Element C, factor 8) and must meet the minimum statistical requirements for measurement error and measure reliability (PQ1 Element D, factor 2).
This applies to the following Programs and Years:
PHQ 201311.15.2012 Attribution Do the NQF or HEDIS provider-level measurement specifications define attribution? For example, to whom to attribute performance: the diagnosing MD, prescribing MD, provider with most encounters and so on? If not, does this not result in variation?
Neither NQF nor HEDIS provider-level measures specifications require a specific attribution method, although HEDIS measures provide options for an organization to consider. While this might result in variation from one organization to another, there is currently no single industry standard method for attribution.
This applies to the following Programs and Years:
PHQ 201311.15.2012 Definition of a Program How does NCQA define a program?
The definition of a program is clearly defined in Section 1 of the Policies and Procedures. A physician measurement program includes: 1) A defined group of physicians– the definition must include both physician type (e.g. specialty) and geographic area covered; 2) A defined set of clinical quality, service or patient experience measures– the program may also include a defined set of cost, resource use or utilization measures; 3) A defined methodology for producing measure results; 4) A specific action taken at a specific point in time based on the measure results.
A hospital transparency program includes: 1) A defined group of hospitals– the definition must include both hospital type and location; 2) A defined set of all-payer quality or cost measures whose results are publicly reported at a specific point in time.
Distinct programs are reviewed separately and a certification decision is issued for each. Physician measurement programs and hospital transparency programs are always distinct programs, even when operated by the same legal entity. NCQA reserves the right to determine that programs that are managed in a decentralized manner constitute distinct programs for review.
To the extent that one program is a derivative of another and share common aspects (e.g., an organization uses the same measures and methodology for a single defined physician group but takes two actions [reporting and network tiering]) and the organization seeks verification for both at the same time, NCQA can review common aspects once to streamline the survey process, although these are distinct programs.
This applies to the following Programs and Years:
PHQ 201311.15.2012 Organizational accountability Are organizations responsible for confirming the factors in Element F, or is this the responsibility of an external vendor?
For Element F, the organization must demonstrate that it has a process to verify that it has followed the specifications outlined in Element C (e.g., sample sizes, attribution,statistical validity). If the organization uses a vendor to administer the survey, this process may be performed by the vendor, but documentation demonstrating how the element is met must be included for the PHQ Survey.
This applies to the following Programs and Years:
PHQ 201311.15.2012 HEDIS measures If we use HEDIS measures, will NCQA still look at code?
No. NCQA does not evaluate an organizations code; it reviews the organizations measure specifications and compares them to the original source specification (if applicable). Note that to be considered from a standardized source, the measure must be the version specified for the level measured; e.g. HEDIS physician level measures, not plan level measures.
This applies to the following Programs and Years:
PHQ 201311.15.2012 Requests for corrections or changes For PQ2: Elements B and C, how can patient experience of care data corrected, when this information is not disclosed to physicians?
The plan is not required to disclose member-specific results, nor is it expected that a physician can correct member responses. At a minimum, the physician must be given the methodology (e.g., sampling, attribution) and survey questions and, upon request, be allowed to confirm that the patients in the universe from which the sample was drawn are his or her patients, given the methodology.
This applies to the following Programs and Years:
PHQ 201311.15.2012 Measure reliability If a plan demonstrates a different methodology for statistical validity, would the methodology be considered?
Element C, Define Methodology requires the organization to have a method for determining measurement error and measure reliability. Element D, Adhere to Key Principles sets requirements for minimum observations or levels of measure reliability or confidence intervalsas applicable for quality and cost, resource use or utilization measures. For calculating measure reliability for PHQ, the organization must use the method described in the Explanation in Element C under the subhead Measurement Error. Measure reliability is defined as the ratio of the variance between physicians to the variance within one physician, plus the variance between physicians. NCQA does not prescribe the method used to calculate confidence intervals because the appropriate method may vary based on the parameter (e.g., mean or proportion).
This applies to the following Programs and Years:
PHQ 201311.15.2012 WHP Performance Measure Reporting What is the process for reporting performance measure results for Accredited With Performance Reporting (AWPR) status?
Organizations are responsible for reporting NCQA WHP performance measure results exactly as specified if they are seeking AWPR status. Organizations must submit performance measure results to NCQA and attain a score of 50% or higher on WHP 12, Element A.
In order to retain AWPR status, organizations must annually submit performance measure results. Organizations that are NCQA Accredited in Wellness and Health Promotion and want to upgrade to AWPR status must submit measure results by the next annual reporting date (April 15) in any year during the accreditation cycle.
Organizations typically complete the WHP Performance Measures Reporting Tool, an Excel workbook. They send the workbook to an NCQA-Certified Auditor to have their measure results audited before submission. The auditor completes the audit worksheet in the Reporting Tool and locks the workbook, the returns the workbook to the organization, which subsequently submits the tool to NCQA.
